HomePeptidesSARMsHRTCalculatorAbout UsContactVerify Product
Home / Peptides / GLOW Blend
GLOW Blend

GLOW Blend

16
Premium aesthetic blend · Skin, hair and integral regeneration
99% Purity Premium Blend Regeneration

Glow Blend combines in a single vial the three most potent peptides for aesthetics and regeneration: GHK-Cu 50 mg (cutaneous signaling and anti-aging), BPC-157 10 mg (tissue repair) and TB-500 10 mg (systemic regeneration), for a total of 70 mg of active peptides per vial. The characteristic blue-purple color confirms the presence of the copper complex. This combination targets every front simultaneously: collagen, wound healing, inflammation, hair growth and skin firmness.

Key Benefits
Integral skin rejuvenation
Increases collagen and elastin
Improves firmness and texture
Stimulates hair growth
Reduces scars and stretch marks
Synergistic tissue regeneration
Mechanism of Action
The triple synergy acts on multiple pathways at once: GHK-Cu drives cutaneous signaling and the synthesis of collagen and elastin, while BPC-157 and TB-500 promote tissue repair and systemic regeneration. Together they modulate collagen, wound healing, inflammation, hair growth and skin firmness in an integral way.
Verify Product Contact
Protocol

Reconstitution & Usage Protocol

Important: Only chill the water for 3 minutes before reconstituting the peptide. Do not prepare with very cold water, because it may freeze, lose its effect or be damaged.
1Reconstitution
Materials: 1 vial of Glow Blend (blue-purple powder, 70 mg total) · 1 vial of bacteriostatic water · U-100 insulin syringe (preferably a very fine 31G–32G needle) · 3 mL syringe · alcohol wipes.
  1. Bring the vial to room temperature for 10–15 minutes.
  2. Disinfect the rubber caps with an alcohol wipe.
  3. Draw 3 mL of bacteriostatic water with the 3 mL syringe.
  4. Inject the water slowly down the inner wall of the vial. The blue-purple powder should dissolve into a translucent blue solution.
  5. Do not shake. Swirl gently for 30–60 seconds until fully dissolved.
Label with the date and refrigerate (2–8 °C). Protect from light. Stable for 28 days.
2Concentration & Dosing
Reconstituting 70 mg in 3 mL · per IU: GHK-Cu 166 mcg + BPC-157 33 mcg + TB-500 33 mcg = 232 mcg total per IU.
Target doseUnitsVolume
GHK-Cu 1.66 mg + BPC 333 mcg + TB 333 mcg (low)10 IU0.10 mL
GHK-Cu 3.33 mg + BPC 666 mcg + TB 666 mcg (standard)20 IU0.20 mL
GHK-Cu 5 mg + BPC 1 mg + TB 1 mg (high)30 IU0.30 mL
Universal formula: IU = desired GHK-Cu dose (mcg) ÷ 166 · BPC-157 and TB-500 enter at the blend's fixed ratio
3Application
Route
Subcutaneous in the abdomen for a systemic aesthetic effect, or localized subcutaneous near the area to be treated (scar, stretch mark, alopecia, lesion), leveraging the local action of BPC-157 and TB-500.
Frequency
Once a day, preferably at night.
Cycle
4–8 weeks with a 2–4 week rest period.
  • To minimize pain (recommended): use a very fine needle (31G or 32G), inject very slowly (takes 8–10 seconds), apply to areas with fatty tissue (abdomen, thigh) and rotate the injection site at each application.
  • Bring the drawn dose to temperature for about 2–3 minutes in your hand before injecting — cold intensifies the burning sensation of the copper.
  • Gently massage the area for ~40 seconds after injection to disperse the peptide and reduce local discomfort.
  • Tip: protect the vial from direct light to preserve the integrity of the copper complex.
  • Before applying: let the drawn dose lose its cold (only the amount to be injected) — hold the syringe in your hand for 2–3 minutes.
  • After applying: gentle massage of the area for ~40 seconds to disperse the peptide and improve absorption.
Importante: Solo poner a enfriar el agua 3 minutos antes de reconstituir el péptido. No preparar con agua muy fría, porque se puede congelar, perder efecto o dañarse.
1Reconstitución
Materiales: 1 vial de Glow Blend (polvo azul-púrpura, 70 mg total) · 1 vial de agua bacteriostática · jeringa de insulina U-100 (preferiblemente aguja 31G–32G muy fina) · jeringa de 3 mL · toallitas de alcohol.
  1. Atemperar el vial 10–15 minutos.
  2. Desinfectar las tapas de goma con toallita de alcohol.
  3. Cargar 3 mL de agua bacteriostática con jeringa de 3 mL.
  4. Inyectar el agua lentamente por la pared interior del vial. El polvo azul-púrpura debe disolverse en una solución azul traslúcida.
  5. No agitar. Girar suavemente 30–60 segundos hasta disolución completa.
Etiquetar con fecha y refrigerar (2–8 °C). Proteger de la luz. Estable 28 días.
2Concentración y dosis
Reconstituyendo 70 mg en 3 mL · por UI: GHK-Cu 166 mcg + BPC-157 33 mcg + TB-500 33 mcg = 232 mcg totales por UI.
Dosis objetivoUnidadesVolumen
GHK-Cu 1,66 mg + BPC 333 mcg + TB 333 mcg (baja)10 UI0,10 mL
GHK-Cu 3,33 mg + BPC 666 mcg + TB 666 mcg (estándar)20 UI0,20 mL
GHK-Cu 5 mg + BPC 1 mg + TB 1 mg (alta)30 UI0,30 mL
Fórmula universal: UI = dosis deseada de GHK-Cu (mcg) ÷ 166 · BPC-157 y TB-500 entran en proporción fija del blend
3Aplicación
Vía
Subcutánea en abdomen para efecto sistémico estético, o subcutánea localizada cerca de la zona a tratar (cicatriz, estría, alopecia, lesión) aprovechando la acción local de BPC-157 y TB-500.
Frecuencia
1 vez al día, preferiblemente en la noche.
Ciclo
4–8 semanas con descanso de 2–4 semanas.
  • Para minimizar dolor (recomendado): usar aguja muy fina (31G o 32G), inyectar muy lentamente (toma 8–10 segundos), aplicar en zonas con tejido graso (abdomen, muslo) y rotar sitio de inyección en cada aplicación.
  • Atemperar la dosis cargada unos 2–3 minutos en la mano antes de inyectar — el frío intensifica la sensación de ardor del cobre.
  • Masajear suavemente la zona durante ~40 segundos post-inyección para dispersar el péptido y reducir molestia local.
  • Tip: proteger el vial de la luz directa para preservar la integridad del complejo cobre.
  • Antes de aplicar: dejar que la dosis cargada pierda el frío (solo la cantidad a inyectar) — sostener la jeringa en la mano 2–3 minutos.
  • Después de aplicar: masaje suave en la zona durante ~40 segundos para dispersar el péptido y mejorar absorción.
Important : Ne refroidir l'eau que 3 minutes avant de reconstituer le peptide. Ne pas préparer avec de l'eau très froide, car elle peut geler, perdre son effet ou être endommagée.
1Reconstitution
Matériel : 1 flacon de Glow Blend (poudre bleu-violet, 70 mg au total) · 1 flacon d'eau bactériostatique · seringue à insuline U-100 (de préférence aiguille 31G–32G très fine) · seringue de 3 mL · lingettes alcoolisées.
  1. Laisser le flacon revenir à température 10–15 minutes.
  2. Désinfecter les bouchons en caoutchouc avec une lingette alcoolisée.
  3. Prélever 3 mL d'eau bactériostatique avec la seringue de 3 mL.
  4. Injecter l'eau lentement le long de la paroi intérieure du flacon. La poudre bleu-violet doit se dissoudre en une solution bleue translucide.
  5. Ne pas secouer. Faire tourner doucement 30–60 secondes jusqu'à dissolution complète.
Étiqueter avec la date et réfrigérer (2–8 °C). Protéger de la lumière. Stable 28 jours.
2Concentration et dosage
En reconstituant 70 mg dans 3 mL · par UI : GHK-Cu 166 mcg + BPC-157 33 mcg + TB-500 33 mcg = 232 mcg au total par UI.
Dose cibleUnitésVolume
GHK-Cu 1,66 mg + BPC 333 mcg + TB 333 mcg (faible)10 UI0,10 mL
GHK-Cu 3,33 mg + BPC 666 mcg + TB 666 mcg (standard)20 UI0,20 mL
GHK-Cu 5 mg + BPC 1 mg + TB 1 mg (élevée)30 UI0,30 mL
Formule universelle : UI = dose souhaitée de GHK-Cu (mcg) ÷ 166 · le BPC-157 et le TB-500 entrent selon la proportion fixe du mélange
3Application
Voie
Sous-cutanée dans l'abdomen pour un effet esthétique systémique, ou sous-cutanée localisée près de la zone à traiter (cicatrice, vergeture, alopécie, lésion) en tirant parti de l'action locale du BPC-157 et du TB-500.
Fréquence
1 fois par jour, de préférence le soir.
Cycle
4–8 semaines avec un repos de 2–4 semaines.
  • Pour minimiser la douleur (recommandé) : utiliser une aiguille très fine (31G ou 32G), injecter très lentement (cela prend 8–10 secondes), appliquer sur des zones à tissu graisseux (abdomen, cuisse) et alterner le site d'injection à chaque application.
  • Laisser la dose prélevée revenir à température environ 2–3 minutes dans la main avant d'injecter — le froid intensifie la sensation de brûlure du cuivre.
  • Masser doucement la zone pendant ~40 secondes après l'injection pour disperser le peptide et réduire la gêne locale.
  • Astuce : protéger le flacon de la lumière directe pour préserver l'intégrité du complexe cuivre.
  • Avant d'appliquer : laisser la dose prélevée perdre son froid (uniquement la quantité à injecter) — tenir la seringue dans la main 2–3 minutes.
  • Après l'application : massage doux de la zone pendant ~40 secondes pour disperser le peptide et améliorer l'absorption.

Open dosage calculator →

Research Highlights

Research Highlights

FAQ

Frequently Asked Questions

What three peptides make up Glow Blend and at what amounts?

Glow Blend is a single 70 mg vial combining GHK-Cu 50 mg (cutaneous signaling and anti-aging), BPC-157 10 mg (tissue repair) and TB-500 10 mg (systemic regeneration). The blue-purple color confirms the copper complex. Marketed strictly for in-vitro and laboratory research; not for human or veterinary use.

How is the 70 mg vial reconstituted and what concentration results?

Add 3 mL of bacteriostatic water down the inner wall and swirl 30–60 seconds without shaking. Each IU then delivers GHK-Cu 166 mcg + BPC-157 33 mcg + TB-500 33 mcg = 232 mcg total per IU. Only chill the water for 3 minutes beforehand; very cold water can freeze or damage the material.

Why does the reconstituted solution appear blue and is that normal?

The blue-purple hue comes from the GHK-Cu copper complex and is expected — the powder dissolves into a translucent blue solution. The color also signals that the vial should be protected from direct light to preserve copper-complex integrity, and the drawn dose warmed in the hand for 2–3 minutes before handling, as cold intensifies the copper's burning sensation in research models.

What dosing range and cycle are referenced for research protocols?

Reference protocols span a low dose at 10 IU (0.10 mL), standard at 20 IU (0.20 mL) and high at 30 IU (0.30 mL), administered once daily, preferably at night, over a 4–8 week cycle with a 2–4 week rest. IU is computed as the desired GHK-Cu dose (mcg) ÷ 166, with BPC-157 and TB-500 entering at the blend's fixed ratio. Research-use framing only.

Related Compounds

Related Compounds

GHK-Cu Anti-Aging
GHK-Cu

GHK-Cu is a tripeptide (glycyl-L-histidyl-L-lysine) bound to a copper atom that occurs naturally in human plasma and declines with age. It acts as a tissue-repair signal, modulating the expression of more than 4000 genes related to wound healing, collagen remodeling, antioxidation and regeneration. The blue-purple color of the powder is characteristic and confirms the integrity of the copper complex.

99% Purity
Details →
Epithalon Longevity
Epithalon

Epithalon (Epitalon) is a synthetic tetrapeptide developed in Russia from studies with pineal-gland extracts. Its main mechanism is the activation of the enzyme telomerase, which lengthens the telomeres (the protective ends of the chromosomes) and delays cellular senescence. Long-term studies in elderly subjects have shown reduced mortality and improvements in aging biomarkers.

99% Purity
Details →
Melanotan II Pigmentation
Melanotan II

Melanotan II is a synthetic analog of the α-MSH hormone that activates the melanocortin receptors, stimulating melanin production and generating a protective tan against UV radiation. It also has desirable secondary effects such as increased libido, mild appetite suppression, and improvement of the metabolic profile. Very popular among fair-skinned people who seek to tan with less sun exposure.

99% Purity
Details →

← Back to full catalog